LED Vs Fluorescent tube comparison chart

Are you looking for the Led Vs Fluorescent tube comparison chart? If yes, then you are at the right place. Here we shall discuss what is the difference between the Led Vs Fluorescent tube and which is better.

There are many LED vs fluorescent tube comparisons as well as LED vs HID comparisons but this article focuses on one particular comparison. I’ve rounded up a large amount of information on both fixtures and have put them into an easy-to-read comparison chart that allows you to see at a glance all the important information.

What are LEDs?

LEDs are solid-state lighting devices that emit light when an electrical current passes through them. They consist of a semiconductor diode that converts electrical energy into light energy.

LEDs are available in a wide range of colors and offer better control over color temperature compared to other lighting options. They are known for their energy efficiency, durability, and instant on/off capabilities.

What are Fluorescent Tubes?

Fluorescent tubes are gas-discharge lamps that utilize electricity to excite mercury vapor, which then emits ultraviolet light. This UV light interacts with a phosphor coating inside the tube, producing visible light.

Fluorescent tubes have been a popular lighting choice for many years, particularly in commercial and industrial settings.

LED Vs Fluorescent tube comparison chart

LED light bulbs are becoming increasingly popular for use in homes and offices. There are many advantages to using LED light bulbs and the most obvious one is that they are energy efficient. They use very little energy and last longer than conventional light bulbs.

Fluorescent tubes are also known as tungsten lights. These are more expensive to buy and maintain. They also have a shorter lifespan than LED bulbs. However, they are very useful for areas that are not exposed to direct sunlight or where a lot of natural light is required.

Comparison table between LED Vs Fluorescent tube :

CategoryLEDFluorescent Tube
LifespanLonger lifespan (up to 50,000 hours)Shorter lifespan (around 10,000 hours)
Energy EfficiencyHighly energy-efficient, consumes less powerRelatively less energy-efficient, consumes more power
Start-Up TimeInstantaneousMay take a few seconds to reach full brightness
Heat GenerationGenerates less heatGenerates more heat
Size and ShapeCompact, available in various shapes and sizesLonger and bulkier, typically tubular in shape
Mercury ContentNo mercury contentContains a small amount of mercury
DimmableMany LED bulbs are dimmableSome fluorescent tubes can be dimmed, but not all
FlickeringNo flickeringMay flicker, especially toward the end of their lifespan
Environmental ImpactEnvironmentally friendly, no toxic substancesContains mercury, and requires proper disposal
Color OptionsWide range of color options is availableLimited color options, mostly cool white or warm white
CostInitially higher costs, but prices have decreased over timeThe relatively lower upfront cost
LED Vs Fluorescent Tube Comparison Chart
LED Vs Fluorescent tube comparison chart


If you want energy-saving bulbs, then both are good, but in different ways. A fluorescent tube has the ability to save up to 80% more energy than a regular incandescent light bulb. But both are different. Let us get into details: 

Led Lights

LED bulbs are brighter than fluorescents, but they are also more expensive. While they last longer, they don’t produce as much light as fluorescent bulbs. They are also more efficient at producing light.

LEDs have three main advantages over fluorescents.

  • They last longer
  • They use less power
  • They are more efficient

LEDs have a lifespan of at least 50,000 hours. The lifespan of fluorescents is only around 10,000 hours. This means that LEDs save you money in the long run.

LEDs use less electricity. If you are trying to save energy, then LED bulbs are the way to go. Fluorescents require a lot of electricity to produce the same amount of light.

LEDs also have better color rendering. This is because LEDs emit light with a specific wavelength spectrum, while fluorescents emit light with a wide spectrum. This means that they have much more natural light.

When it comes to longevity, LEDs are far more efficient and last much longer. While fluorescent tube failure can occur as early as within a few months of installation, led tubes have been known to work for as long as 40 years. But, fluorescent tubes are generally more affordable, so it really depends on your goal and your budget.

What Kinds of LED Lights Are Available?

LED lights are used in a wide variety of ways. From home lighting to outdoor lighting, to automotive lighting, LED light can be used in many ways. In fact, LED lights have been used in many different industries.

In addition to the many uses for LED lights, there are also many different types of LED lights that are available. Some of the most common types of LED lights include spotlights, floodlights, tube lights, and recessed lighting.


A spotlight is a type of LED light that is designed to illuminate a small area. Spotlights are often used for indoor lighting.


Floodlights are used for indoor and outdoor lighting. Floodlights are often used for outdoor lighting.

Tube lights

Tube lights are often used for decorative purposes. These lights are typically used for indoor and outdoor lighting.

Recessed lighting

Recessed lighting is used for indoor lighting. It is a type of LED light that is mounted into a ceiling or wall.


LED Vs Fluorescent tube comparison chart
LED Vs Fluorescent tube comparison chart


Usage of LED Light

There is a wide variety of uses for LED lights, which include lighting, signage, and decorative purposes. If you are looking for a lighting system, you can choose between incandescent, fluorescent, halogen, and CFL (compact fluorescent). These all have their pros and cons, so you need to consider which one is right for you. Here are 10 uses for LED lights:


LED lights are great for indoor lighting because of their energy efficiency. You can also use them for outdoor lighting.


LED lights can be used for exterior signs, interior signs, and displays.


LED lights can be used to decorate your home. You can use them to brighten up a dark room, as accent lighting, or as part of a holiday lighting display.


LED lights can be used for security purposes. They are useful for creating surveillance systems, and can also be used for motion-activated lighting.


LED lights can be used for therapeutic purposes. They can help to reduce stress and improve mood.


LED lights can be used for nighttime illumination. You can use them for accent lighting or provide illumination for an area.

LED Lighting for Construction

Construction workers are always looking for ways to improve their productivity. LED lights are a great way to improve lighting on construction sites. It is an energy-efficient way to light a construction site.

This will help workers work efficiently. It also helps them to avoid eye strain due to the bright light. They can also use LED lights to reduce costs. They can use a smaller number of lights than what was used in the past. This will result in reduced electricity bills.

LED Lighting for Automotive

Auto manufacturers are using LED lights to improve the safety and efficiency of vehicles. They use LED lights in a wide range of areas. They are used in the dashboard, brake lights, headlights, tail lights, and turn signals. They also use LED lights to improve the aesthetic appeal of vehicles.

LED Lighting for Architecture

Architects and designers are using LED lights in the construction of buildings. They are using LED lights to lighten up the interiors of buildings. It is also a great way to light up a dark room. The best thing about LED lights is that they do not produce heat and can be used in places that are exposed to direct sunlight. They are also durable and long-lasting.

Fluorescent tube

Fluorescent tubes are available in different sizes and shapes. The most common is the T-8 size. The shape of the fluorescent tube is like a spiral. . You can normally expect a fluorescent tube to last for six to twelve months with normal usage. On average, a fluorescent tube will use between 20 and 30 watts of energy.

Fluorescent tube lights are the modern trend in lighting that is used for business purposes, offices, shops, and homes.  Fluorescent lights are indeed energy efficient and they consume less energy than conventional incandescent bulbs. Because of this, they are widely used in homes, offices, and small commercial establishments. 

Fluorescent tubes produce about ¼ of the light emitted by incandescent bulbs. To produce the same amount of light as a ¾-inch incandescent bulb, a four-foot fluorescent tube would need to be five or six inches long.

A fluorescent tube has a higher light output per watt than a LED bulb. Thus, fluorescent tubes use lesser energy to generate brighter light. The fluorescent tube also flickers, and it takes some time for our eyes to adjust to the changing light. The fluorescent tube does not last as long as LED.

Types of Fluorescent Tubes

There are many types of fluorescent tubes that are available in the market. They are divided into four categories. These are Compact Fluorescent Light (CFL), Incandescent, Halogen, and LED.


The compact fluorescent lamp has been invented by Philips. It is a compact version of a fluorescent light bulb that produces less heat and consumes less energy than traditional bulbs.


Incandescent lamps use a tungsten filament inside the glass tube that is heated to produce light. It is also known as an old-fashioned or old-style light bulb.


Halogen bulbs emit bright white light and use mercury as a component. The Mercury vapors can harm the environment.


A light-emitting diode is a semiconductor device that emits light when electricity passes through them. They are more efficient and consume less energy than incandescent and CFLs.

Usage of fluorescent blubs

Fluorescent tubes are commonly used in lamps and lighting fixtures. They consist of a glass tube that is filled with a gas that is electrically charged to produce plasma. When electricity is applied to the tube, the electrons are accelerated and collide with the atoms of the gas. This causes the gas to emit a spectrum of visible light.

The glass tube protects the user from the elements and keeps the gas in the tube at a consistent pressure.

Fluorescent Tubes For Home Use

Fluorescent tubes for home use are available in various sizes and shapes. The most common sizes are 12V and 20V.

12V Tubes

12V fluorescent tubes are usually used for decorative purposes. They are often used in ceiling fixtures, recessed lighting, and wall sconces. The bulbs are typically 1 to 2 inches in diameter.

20V Tubes

20V fluorescent tubes are used for indoor lighting applications. The bulbs are usually 3 to 4 inches in diameter. The tubes are more efficient than 12V tubes and last longer.

Emergency lighting

Fluorescent tubes are used in emergency lighting systems. They work well in low-light areas such as hallways, stairwells, and offices.

Office lighting

Fluorescent tubes are used in office lighting systems. They provide better illumination than incandescent lights.

Street lighting

Fluorescent tubes are used in street lighting systems. They give off a brighter light than incandescent bulbs.

Home theater lighting

Fluorescent tubes are used in home theaters. They give off a bright light that is easy to see in dark areas of the room.

Use in Schools

Most schools use fluorescent tubes as the light source for their classrooms. These lights are used in most places of study since they help students see clearly during the day.

Use in Homes

Homeowners use fluorescent tubes to light their homes. These lights are usually found in hallways and bathrooms.

Use in Office Buildings

Office buildings use fluorescent tubes to light the offices. These tubes are used in corridors, stairwells, and in conference rooms.

Use in Restaurants

Restaurants use fluorescent tubes to light their kitchens. These lights are used in most areas of the kitchen such as under the sink, in the freezer, and in the refrigerator.

Use in Factories

Factory owners use fluorescent tubes to light their factories. These lights are used in corridors, warehouses, and in production rooms.

Fluorescent Tubes for Industry

Industrial fluorescent tubes are designed for use in large buildings such as factories, warehouses, and retail stores. These tubes are typically made of glass and contain mercury. The tubes are also designed to withstand high temperatures and humidity.

You can also read related posts:


Are LED lights more expensive than fluorescent tubes?

LED lights may have a higher initial cost, but their energy efficiency and extended lifespan result in long-term cost savings.

Can I replace fluorescent tubes with LED lights?

Yes, fluorescent tubes can be replaced with LED lights by using compatible fixtures or retrofit kits.

Do LED lights flicker like fluorescent tubes?

No, LED lights do not exhibit flickering issues like fluorescent tubes.

Are fluorescent tubes brighter than LEDs?

Both fluorescent tubes and LEDs can provide bright illumination, but LEDs offer better control over color temperature and light distribution.

Which lighting option is more environmentally friendly?

LEDs are considered more environmentally friendly due to their energy efficiency, absence of hazardous substances, and reduced carbon emissions.